uPVC UGDS Pipes
Product Brief
- HSN Code : Pipes- 39172390
- Material: Unplastisized Poly Vinyl Chloride (uPVC)
- Pressure Rating: SN 2, SN 4 & SN 8
- Size: 63 mm to 400 mm
- Standard: IS 15328 – 2003
- Colour: Orange
- Form Supplied: Elastometric sealing ring type pipe with 6mtr. length.
uPVC UGDS Pipes
uPVC UGDS Pipes
Advantages
Highly Durable
Corrosion Resistance
Flexibility
Non-Toxic
Lightweight
Earthquake Resistant
Eco friendly
Technical Details
Jointing
For Selfit Pipe
Measuring
Measure the required length of pipe and marking done.
Cutting
Cutting The pipe must be cut in a square shape. The base of the fitting socket needs a rubber ring to seal it, since an angled cut may result in leakage.
Deburring & Chamfering
All the burr must be removed from the inside and outside of the pipe with a knife, file or de-burring tool. A 10° – 15° chamfer must be made at the end of the pipe.
Cleaning
The surface dirt, grease or moisture must be removed with a clean dry cloth.
Solvent Cement Application
An even layer of cement should be applied to the outer side of the pipe and a medium layer of the plumbing solvent cement to the inside of a fitting.
Assembly
Join the pipe and fitting socket till in contact with the socket bottom. Hold the pipe and fitting together until the pipe does not retract. The excess cement can be removed from the exterior surface of the pipe and fitting. A properly made joint will show a continuous bead of cement around the perimeter of the pipe and fitting.
For Ringfit Pipes
Cleaning
The surface dirt, grease or moisture must be removed with a clean dry cloth.
Rubber Ring fitment
Take rubber ring & clean for surface dirt of any & insert in pipe groove by hand.
Cutting
he pipe must be cut in a square shape. The base of the fitting socket needs a rubber ring to seal it, since an angled cut may result in leakage.
Chamfering and cleaning
The surface dirt, grease or moisture must be removed with a clean dry cloth. A 10° – 15° chamfer must be made at the end of the pipe.
Lubricant application
Apply lubricant even layer on rubber ring prior to insertion.
Assembly
Push the pipe in integrated ring socket end.